Drive Pins Galvanized with Steel Washer

Drive Pins Introduction

Drive pins with metal washer are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The drive pins is manufactured with a 5mm shank in various lengths. knurled shank designs are available for installations in thick steel base materials.The concrete drive pins are also available in with a electronic galvanized (EG) coating for use in treated lumber.The role of the ring gear and the plastic collar of the shank is fixed in the gun barrel, so as not to bias the firing side.

Suitable Base Materials

• Steel
• Normal-weight concrete
• Concrete over steel deck
• Lightweight concrete
• Grouted concrete masonry
• Hollow concrete masonry

Drive Pins Features:

• Pre-mounted steel washer offers maximum pull-over resistance for fastening soft materials to concrete
• Suitable for soft to medium-hard concrete (up to 30 N/mm² concrete strength)
• Suitable for fastening to concrete where high load values are not required
• Best suited for fastening to concrete with a hardness of up to 4,000 psi
• Fastener with pre-mounted washer providing a larger bearing surface for improved clamping of fastened material

General Applications

Drive Pins is a kind of nails which shooting the nail into the concrete or steel and other substrates, forming the fastening effect.

• Fastening wood to concrete,such as plywood, wood battens, formwork, kicker plates,ect
• Attaching a variety of materials to masonry block and concrete;
• Fastening wood profiles to standard-strength concrete;
• Fastening termination bars to secure waterproofing membrane or moisture barriers
• Build formwork boards, safety barriers