Open-End Blind Rivet POP

Material: Aluminium & Steel/ Aluminium&Stainless Steel/ Stainless Steel

Type: Open-End Blind Rivets

Head Style: Dome /Large flange / 120 degree countersunk head

Diameter: M2.4 M3.0 M3.2 M4.0 M4.8 M5.0 M6.0

Length: 4mm-30mm

Finish: Zinc Plated/Color Painted (As customer’s request)

Packing: Boxes+Cartons+Pallets or Customized Packing.

Delivery Time: 15-30 days

Payment Terms: L/C, T/T, Western Union, Paypal

Supply Ability: 500 Tons per Month


Categories: Tags:
  • Description
  • Inquiry


Blind rivets, also commonly referred to as POP Rivets, are mainly used in applications where there is no access to the rear (blind side) of the joint. Rivets have a two-piece construction; one is called the rivet body, shell, or hat and another is called the stem or mandrel. Both the hat and mandrel are pre-assembled and ready to use. Rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint. Upon reaching the designed clamping force, the mandrel snaps and is discarded. A benefit of blind rivets is that they are not material specific meaning they can combine two different material types together the same way.

Open End Blind Rivets are the most popular rivet variety available.

Open-End Blind Rivet


  • Ideal for wide range of applications.
  • Available in a variety of materials.
  • Dome,countersunk or large flange head styles.
  • Painted color finishes available to match surroundings.

Instaling a Blind Rievt

Before rivet installation can occur, several things must be taken into account.

  • Host Materials
  • Head Shape Design
  • Rivet Length & Diameter
  • Grip Range
  • Load and Shear Values
  • Rivet Installation Tool

Installing a blind rivet is a simple and extremely fast process ,only the few simple steps listed below.

  1. Drill a hole into the materials.
  2. Choose a place the rivet into the two materials.
  3. Place the Rivet Installation Tool on the mandrel of the rivet.
  4. Activate the tool (usually by some lever or trigger mechanism) to pull the mandrel towards the surface.

Blind Rivet Applications:

Open End Blind Rivets can be used just about anywhere if they are properly installed. Most of them are used in Aircraft manufacturing, Machinery, Sheet metal fabricating, Small Electronics, Structural Beams, Battleships and Submersibles.

How To Remove a Rivet ?

Blind Rivets are meant to be permanent joints but sometimes must be removed. To remove blind rivets, take a drill bit that is the same diameter as the hat or a size larger and drill through the rivet. Make sure the drill bit is rated for the rivet material. If before or during the rivet drilling process the rivet begins to spin, stop and cover the rivet in blue painters or duct tape. This should be enough to hold the rivet in place as the drill eats through it. Once extracted, the same hole can be used for a new rivet.


POP End Rivets can be used just about anywhere if they are properly installed. Most of them are used in RVs, Trailers, Aircrafts, Machinery, Jeans, Small Electronics, Structural Beams, Battleships and Submersibles.