How to choose drywall nails?

08/25/2023

        Drywall nails are now in our daily life, is one of the most commonly used building materials, in the appearance of the biggest feature is the horn head shape, double line fine teeth drywall screws and single line coarse teeth drywall screws, the biggest difference between the two is that the former thread is double thread. It is suitable for the connection between the gypsum board and the metal keel whose thickness does not exceed 0.8mm, while the latter is suitable for the connection between the gypsum board and the wooden keel. Drywall screw series is one of the most important categories in the whole fastener product series. The product is mainly used in various gypsum board, light partition wall and ceiling ceiling series installation.

        Therefore, the choice of drywall nails is very important, we require that the material of drywall nails must be good when purchasing drywall nails, and the production requirements of the product specifications are also very strict.

        Here’s how to buy the right drywall nails:

        First, the top of the drywall nail is round, which is also a standard requirement for round head screws.

        We usually see in the drywall nails are not all the nail heads are round, there are also some manufacturers produced drywall nails head may not be very round, some even slightly square. The consequence of this is that it cannot be completely matched with the gypsum board after screwing in, concentric circles, and rotation around a central point, so the design method is mainly scientific and reasonable. More conducive to improve work efficiency.

        Second, the head of the drywall nail should be pointed.

        In the penetration of relatively hard objects, if we do not drill two holes in advance directly into, so the quality of the sharp corner of the drywall nail must be better, the general requirement is between 23 and 27 degrees, the head of the drywall nail is required to be full, there can be no drag wire, cracking phenomenon. Especially when used in light steel keel, if the use of poor quality pointed will lead to unusable, seriously affecting work efficiency and safety. According to the national standard, the wall nails should be able to drill through the 6mm iron plate in 1 second.

        Third, the drywall nails must not appear eccentric.

        The easiest way to determine whether the drywall nail is eccentric is to place the round head down on the table, see if the threaded part is vertical, and to be in the middle of the head. Once eccentric, the use of power tools in the screw is to cause the tool to shake, serious damage will be screwed into the material.

        How to determine whether the product is of good quality? High quality drywall nails with high quality material selection, smooth surface without burrs, high quality and durable workmanship, clear thread, smooth surface deep screw, sharp screw, not easy to slip when rotating, and a standard cross slot, not easy to slip when installing, quick installation saves time. When you buy drywall nails, you must strictly follow the above purchase standards. Now drywall nail manufacturers generally produce more black, that is, black phosphating. They also come in blue and white. They’re galvanized. The drywall nails produced in our factory are manufactured in strict accordance with international standards, and can be customized according to your various needs, if you are interested, please come to inquire.