SS تروس رئيس آلة المسمار
نوع الرأس: تروس رئيس
رقم الموديل: مسامير الآلة
طول: 3مم ~ 80 مم
بحجم: M1 ~ M36
ينهي: سهل,مطلي بالزنك,مصنوع بطريقة مخصصة
مواد: ستانلس ستيل, صلب
التعبئة: صندوق صغير أو حجم كبير في الكرتون مع أو بدون منصة نقالة
خدمة: OEM / ODM تم قبوله
- Description
- Inquiry
Introduce
Machine screws, also sometimes referred to as machine bolts, are normally smaller than the average screw. Round and Pan heads will protrude from a flat surface, while flat head machine screws are designed for holes that are countersunk so that they lay flush with the surface.
The stainless steel machine screw has a flat surface and a button head with a star driver. Colleague stainless steel has corrosion resistance and may be magnetic. The star-shaped driver has a six-point notch with a center pin, which requires a special driver to tighten or loosen the screw, so it can prevent tampering.
رسم البعد
SS تروس رئيس آلة المسمار
ميزة
Machine screws are straight shank fasteners with a blunt end and machine threads that run the entire length of the shank. They are designed to go through a hole or. … Machine screw heads come in binding undercut, button, fillister, flat, indented hex, indented hex washer, oval, pan, round, and truss.
- Although this isn’t always the case, most machine screws are fully threaded.
- Machine screws are usually stronger than many other screw types.
- Standard machine screws tend to be somewhat smaller than many other types of bolts and fasteners.
- Machine screws are typically designed with finer, more accurate threads than alternative fastener types.
- Machine screws are almost always blunt-ended (flat-tipped), unlike many other screw types which taper to a sharp point at the tip.
تطبيق
- Vehicles
- Engines
- Tool assembly
- High speed rail
- Electronic devices
- Electrome chanical devices
- Large scale industrial equipment