Coil Siding Nails Yellow Coated Ring Shank
Material: Carbon Steel, Stainless Steel
Diameter: 2.5–3.1 mm
Nail number: 120–350
Length: 19–100 mm
Collation type: wire
Collation angle: 15°
Head Type: Flat Head
Shank type: Ring Shank
Point: Diamond, Chisel, Blunt, Pointless, Clinch-point
Surface treatment: Painted Coated
- Description
- Additional Information
- Inquiry
Production Line of Coil Siding Nails
Introduction
For use in a pneumatic nails gun, nails are assembled together in coils, that is why it is called as coil nail. The galvanized coil siding nails with smooth, spiral or ring shanks are often made of Q235 steel, welded to double wires or copper collations at 14, 15 or 16 degree angles.
The main types of coil siding nails include smooth shank coil siding nails, ring shank coil siding nails, and screw shank coil siding nails.
Shank Dia | Length | Head Dia | PCS / Roll | |||
Inch | mm | Inch | mm | Inch | mm | |
0.083” | 2.1 | 1-1/4”~2” | 32~50 | 3/16” | 4.7 | 400*40 |
0.090” | 2.3 | 1-1/2”~2-1/4” | 38~57 | 1/5” | 5.8 | 300*30 |
0.099” | 2.5 | 1-3/4”~2-1/2” | 45~65 | 1/4” | 6.1 | 300*30 |
0.113” | 2.87 | 1-1/4”~3” | 32~75 | 1/4” | 6.3 | 250*20 |
0.120” | 3.05 | 2-3/8”~3-3/4” | 60~95 | 9/32” | 7.1 | 200*20 |
0.131” | 3.33 | 3”~5” | 75~127 | 9/32” | 7.1 | 200*20 |
Shank Type
- Ring Shank: Ring shank nails offer superior holding power over smooth shank nails because the wood fills in the crevasse of the rings and also provide friction to help prevent the nail from backing out over time. A ring shank nail is often used in softer types of wood where splitting is not an issue.
Surface Treatment
Painting coated coil siding nails are coated with a layer of paint to help protect the steel from corroding. Although painted fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application.
General Applications
Save on wire coil framing nails at Nail Gun Depot. These 15 degree framing nails can be used with most coil nailers from Bostitch, Senco, Hitachi and Apach.
These wire harness coil nails are compatible with pneumatic wire coil frame nailers. Glossy finish for interior use on untreated wood only Wire-finished full round head and ring shank for increased grip Use with 15 degree coil frame nailers.
Additional Information
Diameter: | M2.1 to M4.0 |
---|---|
Shank type: | Smooth/Screw/Ring |
Length: | From 25mm(1″) to 102mm(4″) |
Material: | Q195/Q235 |
Finish | Polished / Paint Coated / Galvanized |
Packing | Carton as per factory standard or according to customer’s request |