18GA 92 Series Staple Pin
Gauge: 18GA
Crown: 8.85mm
Width: 1.25 ± 0.2mm
Thickness: 1.00 ± 0.02 mm
Length: 10mm ~ 45mm
Colour: galvanized,golden,copper,ect.
Material: High Tensile Strength Galvanized Wire
Model: 9216, 9219, 9220, 9222, 9225, 9228, 9230, 9232, 9235, 9238, 9240
Sample: Accept
Packing: Small box or bulk in carton with or without pallet
Service: OEM/ODM is accepted
- Description
- Inquiry
Introduce
Modern staples for paper staplers are made from zinc-plated steel wires glued together and bent to form a long strip of staples. 92 Series Staple Pin strips are commonly available as “full strips”. Both copper plated and more expensive stainless steel staples which do not rust are also available, but uncommon.
92 Series Staple Pin are usually two-pronged fasteners made of metal that are used to connect or glue materials together. Secondly, large staples can be used with hammers or staplers for masonry, roofing, corrugated boxes and other heavy-duty applications. However, smaller staples can be used with the stapler to hold the paper together.
Dimension drawing
Item | Width | Length | Pcs/Stick | Pcs/Box | Box/Ctn | Ctn/Pallet |
92/12 | 1.25 ± 0.2mm | 12mm | 100 | 5000pcs | 10 | 40 |
92/14 | 1.25 ± 0.2mm | 14mm | 100 | 5000pcs | 10 | 40 |
92/15 | 1.25 ± 0.2mm | 15mm | 100 | 5000pcs | 10 | 40 |
92/16 | 1.25 ± 0.2mm | 16mm | 100 | 5000pcs | 10 | 40 |
92/18 | 1.25 ± 0.2mm | 18mm | 100 | 5000pcs | 10 | 40 |
92/20 | 1.25 ± 0.2mm | 20mm | 100 | 5000pcs | 10 | 40 |
92/21 | 1.25 ± 0.2mm | 21mm | 100 | 5000pcs | 10 | 40 |
92/25 | 1.25 ± 0.2mm | 25mm | 100 | 5000pcs | 8 | 40 |
92/28 | 1.25 ± 0.2mm | 28mm | 100 | 5000pcs | 8 | 40 |
92/30 | 1.25 ± 0.2mm | 30mm | 100 | 5000pcs | 8 | 40 |
92/32 | 1.25 ± 0.2mm | 32mm | 100 | 5000pcs | 6 | 40 |
92/35 | 1.25 ± 0.2mm | 35mm | 100 | 5000pcs | 6 | 40 |
92/38 | 1.25 ± 0.2mm | 38mm | 100 | 5000pcs | 6 | 40 |
92/40 | 1.25 ± 0.2mm | 40mm | 100 | 5000pcs | 6 | 40 |
Advantage
- The crown of the 92 Series Staple Pin can be used to bridge materials butted together.
- Most kinds of 92 series staple pin are easier to produce than nails or screws.
- The crown can bridge a piece and fasten it without puncturing with a leg on either side, e.g. fastening electrical cables to wood framing.
- The crown provides greater surface area than other comparable fasteners. This is generally more helpful with thinner materials.
How to determine staple size
In choosing the proper staple leg length for a job, there are two basic things to consider: thickness of material to be stapled and hardness of the wood.
Generally, for hardwoods, wood penetration of about 3/16 inch to 1/4 inch is sufficient; for softwoods, up to 3/8 inch is sufficient. Therefore, the 92 Series Staple Pin of the decorative staples should be flush with the surface below. However, if the 10F Series Staple Pin used is not flush with the underlying surface, – we recommend the next shorter leg length for desired results.
18GA 92 Series Staple Pin Color
Application
The surface adopts copper plating technology, which has rust protection, fashionable characteristics.
- Furniture,upholstery
- Board,slat,decorative moldings
- Windows and doors
- Interior construction,cabinets
- Picture frame assembly
- Hardwood trim, glazing beads
- Joinery manufacturing
- Furniture manufacturing,etc.